Summa F Series

Media Handling Has Never Been Easier

Pneumatic Media-Advance Clips

Optional pneumatically-driven media advance clamps hold the material down while pulling it forward in order to work continuously in panels or multiple jobs.

Category:

Vaccum Pump and Selector

The vacuum pump with sound absorber holds the material in place during the job while the selector adjust the vacuum automatically to match the working area.

Conveyor System

This optional conveyor system and media support rollers allow the cutting / creasing / annotating of large lengths of flexible material to large production runs. Due to split of the roll-support, two smaller rolls can be loaded next to each other maximizing the workload of the machine.

 

Multifunctional Head

The multifunctional head holds up to three modules at one time. The central unit houses a positioning laser and an integrated camera system for fast and accurate contour cutting-mark recognition.

 

Powerful Tangential Module

Offers a vertical force of 12 kg and corresponds to a wide range of matching tools. Each tool has a barcode identifier that ensures automatic recognition and parameter settings.

 

 

Media Advance Clamps

Pneumatically-driven media advance clamps hold the material down while pulling it forward in order to work continuously in panels or multiple jobs.

 

Vacuum Pump and Selector

The vacuum pump with sound absorber holds the material in place, while the selector adjusts the vacuum automatically to match the working area.

Conveyor System
This optional conveyor system and media support rollers allow the cutting / creasing / annotating of large lengths of flexible material to large production runs. Due to split of the roll-support, two smaller rolls can be loaded next to each other maximizing the workload of the machine.

 

Axis Control Software

Axis Control software gives you full control over Summa’s cutting table. The optimized design of the touch screen makes Axis Control the optimum interface for the machine operator. With the supplied wireless controller, the operator is free to move around the table while changing basic settings.

 

Safety Pack

The safety pack assures maximum security. A laser beam systems surrounds the table and controls the motion area. The unit can then work safely, using full speed while in production mode. When put into safety mode, the machine settings can be securely adjusted.

 

Models

F1612

F1330

F2630

Cutting Area 63 in. (160 cm) wide x 47.2 in. (120 cm) long up to 164 ft. (50 m) long in multi panel 51 in. (129 cm) wide x 120.1 in. (305 cm) long up to 164 ft. (50 m) long in multi panel 104.3 in. (265 cm) wide x 120.1 in. (305 cm) long up to 164 ft. (50 m) long in multi panel
Media Width Up to 65 in. (165 cm) Up to 53 in. (134 cm) Up to 106.3 in. (270 cm)
Multi Panel* 1968 in. (5000 cm) *Media clamps and roll-feed and/or conveyor belt system are required
Repeatability Within +/- 0.05 mm on plots
Accuracy 0.05 % of move or 0.05 mm, whichever is greater
Speed Up to 39.4 in./sec (1000 mm/sec)
Acceleration Up to 1 G
Clearance* 1.9 in. (5 cm) *Distance between vacuum table and Y-beam. Not taking into account the thickness of a cutting matt or conveyor belt
Maximum Allowed Forces Vertical: 200 Newton, Horizontal: 200 Newton
Maximum Table Load 10.2 lb/ft2 (50 kg/m2)
Connectivity USB
Power Requirements 3 Phase 208V+N or 3 Phase 230V or 3 Phase 400V+N
Dimensions 92.5 x 76.3 x 43.3 in. (235 x 194 x 110 cm) – without roll support 84.3 x 161.4 x 48 in. (214 x 410 x 122 cm) – without roll support 137.4 x 161.4 x 48 in. (349 x 410 x 122 cm) – without roll support
Weight 1100 lbs (500 kg) 3300 lbs (1500 kg) 3970 lbs (1800 kg)
Operating Temperature 59˚ to 95˚F (15˚ to 35˚C)
Standard Accessories Drag Knife Module, Conveyor System, Roll-Feed System, Safety Beam System, Pneumatic Pack, wireless controller w/ charger, standard 36˚ blade holder, 1 standard blade, 1 fiber-tip pen, hex screwdriver (4mm), hex screwdriver (2.5mm), USB cable (3 meter), USB extension cable (0.5 meter), media guide flanges (set of 2), CD w/ manuals and drivers
Optional Accessories Tangential Knife Module, F Series Router System, Electronic Oscillating Tool, Pneumatic Oscillating Tool, Kiss Cutting Tool, Single Edge Cutout Tool, Double Edge Cutout Tool, Heavy Duty Cutout Tool, Creasing Tools, V-Cut Tools, SummaFlex™, SummaFlex Pro™ production software
Warranty (USA) One-year parts and labor limited warranty, toll-free technical support