Overcoming the previously held misconceptions about solvent inkjet printers, the JV3 series has achieved enormous popularity ever since its release. Following in the footsteps of this revolutionary machine, the JV33 series was created. In addition to various enhancements which bring out a high quality print of 1,440 dpi, the new JV33 series has increased print speed. With it's compact design and affordable price, the JV33 series is an attractive option for any shop. Mimaki's flagship product has established high standards which set it apart from the competition.

Precise control of ink firing reproduces details of photo image at a maximum resolution of 1,440 dpi. Even edges of 4-point text are printed sharp and clear.

By producing dots in three different sizes, smooth high resolution graphics are created without a grainy appearance. Even at high speed and in low resolution mode high quality printing is possible.

A triple stage intelligent heater automatically heats up the media to the appropriate temperature, thus improving the performance of ink. A newly mounted Post-heater quickens drying time and thus enables a fast take-up of the media.

UISS for continuous printing is standard on JV33 machines. The JV33 can utilize two cartridges per color in 4-color mode. When the ink cartridge runs out, another cartridge begins supplying ink and helps prevent running out of ink. A maximum of 880cc ink per color can be loaded at one time. With 880cc of ink loaded at one time, a 50m (54yd) roll of media can be printed without interruption. Ink cartridges can be changed during printing.

		JV33-130	JV33-160
Head		On-demand Piezo head (180nozzles x 8 lines) x1 head
Maximum print width		1,361mm (53.5")	1,610mm (63.3")
Printing resolution		540,720,1,440dpi
Printing mode (scan x feed)		540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
		720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
		1,440 x 1,440dpi
Ink	Kind	Exclusive Solvent ink: ES3 ink, SS21 ink
		Exclusive aqueous pigment ink
		Exclusive dye sublimation ink
	Capacity	4-color mode:440cc cartridge x 2/color, 880cc/color
		6-color mode:440cc cartridge x 1/color, 440cc/color
Media	Size	1,371mm (53.9")	1,620mm (63.9")
	Roll weight	Less than 25kg (55.1lbs.)
	Print surface	Face out
	Roll inside diameter	2 inch or 3 inch
Media cutting		Cutting on Y direction by cutter at the head
Media heater		Triple stage intelligent heater (Pre/Print/Post)
Media Take-up device		Roll take-up device (standard), inside/outside selectable
Interface		USB2.0
Applicable standards		VCCI Class A,FCC Class A, UL 60950
		CE Marking (EMC directive, Low voltage directive), CB report
Power		AC100~120V±10%, AC220~240V±10%, 50/60Hz±1Hz
Power consumption		Less than 1,440 VA
Operation environments		Usable temperature:20°C~35°C (64~95°F), Humidity:35~65%RH (No condensation)
Dimensions (W x D x H)		2,289 x 739 x 1,424mm (90.1" x 29.1" x 56.1")	2,538 x 739 x 1,424mm (99.9" x 29.1" x 56.1")
Weight		145kg (320lbs.)	160kg (353lbs.)