Add to Cart for Your Price!
Following the success of Mimaki's solvent inkjet printers, various solutions to make contour cuts of printed materials have been explored. Mimaki has introduced a solution to the problem of making consecutive contour cuts by integrating the JV33 and CG-FXII series continuous crop mark detection ability. The system is widely used for decals, vehicles, seals & labels, POP displays and T-shirt decorations. CJV30 series is an integrated print and cut device that will automatically contour cut without any steps in between. This delivers a seamless workflow which utilizing our vast experience and expertise in print & cut. One integrated device fits in a small office space with the benefit of an affordable price. Customers who have limitations in their office space and budget now have a choice to use Mimaki's sophisticated print & cut technology for contour cutting. The compact design of the 60cm (24-inch) CJV30-60 is especially suitable for retailers to make sales promotional displays.
The CJV30 series uses fast drying SS21 solvent ink, which enables it to make contour cutting soon after printing without ink lifting. In addition to this, a newly developed Auto Media Clamp function varies clamp conditions for priting and cutting for various media. Printing requires several pinch rollers to securely hold the media in place, when cutting - this requires two pinch rollers (and wider media needs three pinch rollers). Four levels of clamp pressure (strong, medium, week and off) are selectable according to the type of media. These conditions can be set from RIP software and are automatically switched during print and cut. This automatic function eliminates operator guess work and allows for long and continuous operation without additional operator actions.
The Continuous Crop Mark Detection function can deliver high productivity even when lamination is required. When substrates are re-set for lamination after printing, an optical sensor enables automatic consecutive detection of crop marks and precise contour cutting can be made aligning each image automatically.
 |
CJV30-60 |
CJV30-100 | CJV30-130 | CJV30-160 |
|
| Maximum print / cut width |
610 mm (24.0") |
1,020 mm (40.1") | 1,361 mm (53.5") | 1,610 mm (63.3") | |
| Print resolution | 540 dpi, 720 dpi, 1440 dpi | ||||
| Print mode (Scan x Feed) |
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi | ||||
| 720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi | |||||
| 1,440 x 1,440dpi | |||||
| Ink | Kind | Exclusive solvent ink: SS21 ink, ES3 ink |
|||
| Capacity | 4-color mode: 440 cc cartridge x 2/color, 880 cc/color | ||||
| 6-color mode: 440 cc cartridge x 1/color, 440 cc/color | |||||
| Media | Width | 620 mm (24.4") | 1,030 mm (40.5") | 1,371 mm (53.9") | 1,620 mm (63.7") |
| Thickness | Less than 1.0 mm | ||||
| Roll weight | Less than 25 kg (55 lbs.) | ||||
| Roll diameter | Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1") | ||||
| Maximum cutting speed | 30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45) | ||||
| Cutting force | 10-350 g | ||||
| Applicable tools | Cutter, Water based ball-point pen, Oil based ball-point pen |
||||
| Media cutting | Cutting in Y direction by cutter on the head | ||||
| Media heater | Pre/print/post heater | ||||
| Media take-up device | Roll take-up device (Standard), inside/outside selectable | ||||
| Command | MRL-III , MGL-IIc2 | ||||
| Interface | USB 2.0 | ||||
| Applicable standard | VCCI class A, FCC class A, UL60950, CE Marking (EMC directive, low voltage directive), CB report |
||||
| Power | AC100V~240V, Less than 1,380VA | ||||
| Operation environments | 20°C~35°C, 35~65%RH (No condensation) | ||||
| Dimensions (W x D x H) |
1,524 x 739 x 1,424mm (60" x 29.1" x 56.0") |
1,934 x 739 x 1,424mm (76.1" x 29.1" x 56.0") |
2,289 x 739 x 1,424mm (90.1" x 29.1" x 56.0") |
2,538 x 739 x 1,424mm (99.9" x 29.1" x 56.0") |
|
| Weight | 110kg (242 lbs.) |
130kg (286 lbs.) |
145kg (319 lbs.) |
160kg (352 lbs.) |
|
No Loading Dock?
You'll need to add a liftgate.
Cart
| Cart at a Glance |