Gerber Solara ion Epson Stylus Pro 7900 Epson Stylus Pro 9900Epson Stylus Pro 7880 Epson Stylus Pro 9880Epson Stylus Pro 4880 Epson Stylus Pro 3800Epson GS6000 Epson Stylus Pro 11880
HP Designjet Z6100 HP Designjet Z3200 HP Designjet Z2100 HP Designjet T1100 HP Designjet T610 HP Designjet 9000 HP Designjet 10000 HP Designjet 4500
Canon imagePROGRAF iPF6100 Canon imagePROGRAF iPF6200 Canon imagePROGRAF iPF8100 Canon imagePROGRAF iPF9100 Canon imagePROGRAF iPF8000s Canon imagePROGRAF iPF9000s Canon imagePROGRAF iPF810 Canon imagePROGRAF iPF820 Canon imagePROGRAF iPF810 Pro Canon imagePROGRAF iPF820 Pro
Mimaki JV5-160S Mimaki JF-1610Mimaki JF-1631Mimaki JV5-320SMimaki JV33-130Mimaki JV33-160Mimaki CJV30
Mimaki CF3 Series Cutter
Add to Cart for Your Price!
Add to Cart for Your Price!
A color photo sensor detects registration marks printed on substrates regardless of color of the substrates. Precise contour cutting can be made by adjusting alignment and distance.
The vacuum table is divided into six zones*. Its activated zones can be set according to the size of the material. In addition, the air stream can be reversed to move heavy materials with ease. *1610 has 2 zones.
M Head |
R1 Head (Reciprocating Cutter) |
TF2 Head (Tangential Cutter) |
||
| Rigid materials, like acrylic and aluminum, can be cut with a high speed spindle. Hight position control enables groove cuts and repeated cutting of thicker materials. | The reciprocating cutter allows for cutting thick materials up to 20mm (0.78"). Creasing tools produce optical creases in cardboards and corrugated boards. | Two types of tangential cutters are available, which control the direction of the cutter edge. Various materials, ranging from soft to ridged, can be cut. |
| CF3-1631 | CF3-1610 | ||
| Effective cut area | 3,100mm x 1,600mm (122" x 63") |
1,000mm x 1,600mm (39.3" x 63") |
|
| Driving method | X,Y,Z,θ DC-servo, Special timing belt | ||
| Maximum speed | 50cm/s (20in/s) | ||
| Maximum cutting depth |
Router | 50mm (1.96") | |
| Tangential cutter | 10mm (0.39") | ||
| Recipracal cutter | 20mm (0.78") | ||
| Media set device | Air suction by vacuum blower | ||
| Command | MGL-IIc3 (support MGL-IIc) | ||
| Interface | USB, RS-232C | ||
| Dimentions (W x H x D) | 2,250 x 4,120 x 1,320mm (88.6" x 166.2" x 52") |
2,250 x 1,860 x 1,320mm (88.6" x 73.2" x 52") |
|
CF3-1631 63"x122" Router Head
CF3-1631 63"x122" R1 Head
CF3-1631 63"x122" TF2 Head
CF3-1610 63"x40" Router Head
CF3-1610 63"x40" R1 Head
CF3-1610 63"x40" TF2 Head
Certified Installation Required
Dock-to-Dock Shipping Only! Pallet jack and forklift required
No liftgate avaiable for this product
No liftgate avaiable for this product
Cart
| Cart at a Glance |